Vitamin base which, thanks to the fiber content, creates a protective patch on the brittle and brittle nail plate.
It allows you to build and extend it by approx. 7 mm.
How to use?
Revital Base Fiber version without the application of coloured UV/Led Gel Polish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with Nail Cleaner.
2. Apply the primer
* on the prepared nail plate, then apply a thin layer of Revital Base Fiber, and cure in the LED / UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the nail form (if you decide to extend it).
Cure the whole in a LED / UV lamp according to the table. To obtain the proper structure of the nail, the operation should be repeated.
4. After hardening, gently remove the nail form and smooth the nails with a 180-grit file.
Remove the dust formed, then rinse with a cotton pad soaked in Nail Cleaner.
5. At the end, we apply a thin layer of Top Hard, cure in the LED / UV lamp according to the table.
After curing, rinse the sticky layer with Nail Cleaner.
* We recommend using a dedicated primer for a given nail plate.
Revital Base Fiber version with the application of coloured UV/LED Gel Polish:
1. Gently polish the nail with a polisher, remove the dust formed, then rinse with Nail Cleaner.
2. Apply the primer * on the prepared nail plate, then apply a thin layer of Revital Base Fiber, and cure in the LED / UV lamp according to the table.
3. Apply a second, slightly thicker layer on the natural nail and on the nail form (if you decide to extend it).
Cure the whole in a LED / UV lamp according to the table.
To obtain the proper structure of the nail, the operation should be repeated.
4. After hardening, gently remove the template and smooth the nails with a 180-grit file.
Remove the dust formed, then rinse with a cotton pad soaked in Nail Cleaner.
5. Apply a layer of UV/LED Gel Polish in the selected colour and cure in the LED / UV lamp according to the table (the darker the colour, the longer the curing time).
Repeat the operation to obtain a depth of colour.
6. Finally, apply a thin layer of Hard Top, cure in the LED / UV lamp according to the table.
After curing, rinse the sticky layer with Nail Cleaner.
* We recommend using a dedicated primer for a given nail plate.
