Lamp for nail professionals! Quickly cures UV / LED gels and nail polishes. Designed to give comfort to your eyes while working. Dual Led technology - a combination of LED and UV light (365 nm + 405 nm) cures all hybrid gels and nail polishes. 42 evenly distributed LEDs make the product perfectly cured, and you will have more freedom of movement! Device life: 50,000 hours. It does not irritate the eyes without burning the nail plate. Technical Specifications: Motion sensor LED time display Timer with 3 curing modes: 10, 30, 60 seconds 99s Low Heat Mode Power socket Carrying handle 42 LEDs UV / LED (365 + 405nm) Power: 80W Dimensions: 235 x 223 x 102 mm User manual Connect the lamp with the power cord to a power source. The timer has 4 curing modes: 10s, 30s, 60s and 99s (Low Heat Mode) After starting the lamp, you can select the appropriate timer button so that the lamp goes into standby mode and starts counting down the selected curing time (each product has its specific curing time). After pressing the selected timer button again during operation, the lamp will go into standby mode. After inserting your hand without selecting the operating time, the motion sensor will start the lamp automatically in the 120s mode. Changing the lamp power from 54W to 80W - when choosing the operating time between 10s, 30s, 60s or putting your hand to the lamp and starting it by the motion sensor - press and hold the 99s / Double Power button, it will allow you to switch the power from 48W to 54W. The lamp power can be changed only when the lamp is working in the mode of operation time selection or by the motion sensor. Low Heat Mode - when you hold down the 99s button, the device will switch to Low Heat Mode, i.e. the lamp gradually increases the intensity of the light until it reaches full power. Due to this effect, the hardening process of gels or hybrids does not cause a burning sensation of the nail plate. Remembering the selection of working times - the 10s, 30s, 60s, 99s buttons have a memory function. After selecting a certain time, the lamp remembers the choice and the next time you put your hand in, the lamp starts with the previously selected time. Timing on the LED display - after selecting the operating time between 10s, 30s, 60s, the time is counted down from the selected time to 0. If the 99s Low Heat Mode is activated and automatically activated by the motion sensor, the time is counted from 0 to 99s or 120s depending on the option selected. After finishing work, disconnect the lamp from the power source.
